Drinking Water Basic Tests

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Nitrate, Nitrite, Free Chlorine and Total Chlorine.
(7 tests per set).

Good experiment for a first time science fair project. Testing only takes a few minutes per sample.

Drinking Water Basic Tests
Water Filter Performance Water Test Kit

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Total Dissolved Solids (TDS), Iron+2 and+3, Free Chlorine and Total Chlorine.
(7 tests per set).

Compare water filter effectiveness by testing before and after water filtration.
Effects of Water Quality on Paper Making Water Test Kit

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Free Chlorine, Total Chlorine and Total Dissolved Solids (TDS).
(6 tests per set).

Indoor experiment for a scrapbook, greeting cards etc. science fair project. Testing only takes a few minutes per sample.

Compare different water qualities on making paper.
Fertilizer Pollution

Each water sample is tested for this Set of parameters: Alkalinity, pH, Nitrate, Nitrite and Phosphate.
(5 Tests per set).

Outdoor experiment for a first time science fair project. Testing only takes a few minutes per sample.

Fertilizer pollution runoff from irrigation and storm water.
Metal Pipe Contamination

Each water sample is tested for this Set of parameters: pH, Copper, Zinc and Iron+2 and +3.
(4 tests per set).

Experiment for a first time science fair project. Testing only takes a few minutes per sample.

Test metal pipe and plumbing corrosion from water before and after flushing.
Copper and Acidic Water

Each water sample is tested for this Set of parameters: Copper and pH.
(2 tests per set).

Experiment for a first time science fair project. Testing only takes a few minutes per sample.

Test corrosion of copper metal (pipe, penny etc.) by acidic water.
Checking Pet Drinking Water Bowl

Each water sample is tested for this Set of parameters: pH, Alkalinity, Free Chlorine, Total Chlorine plus Bacterial Growth Indicator.
(5 tests per set).

Experiment combines chemical and bacteria testing and most any kind of pet or pets. Chemical testing only takes a few minutes per sample. The bacteria sample grows for 2 days before reading.

Monitor pet water source to determine when to clean and change.
Compare Juice Soda Pop Milk

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Total Dissolved Solids (TDS).
(4 tests per set).

Experiment for a first time science fair project. Testing only takes a few minutes per sample.

Compare the differences between drinks.
Cooking Vegetables in Water

Each water sample is tested for this Set of parameters: Alkalinity, pH, Free Chlorine and Total Chlorine, Total Dissolved Solids (TDS) and Dissolved Metals (Combined Metals Cu+2, Co+2, Zn+2, Cd+2, Ni+2, etc.).
(6 tests per Set).

Test water before and after cooking vegetables.
Plant Growth Nutrients Plus Bacteria in Water

Each water sample is tested for this Set of parameters: Phosphate, Nitrate, Nitrite, Alkalinity, pH Plus Bacterial Growth.
(6 tests per set).

Monitor nutrient uptake and release due to plant growth. Chemical testing only takes a few minutes per sample. The bacteria sample grows for 2 days before reading.

Fertilizer influence on plant growth and bacteria growth response.
Plant Growth Nutrients in Water

Each water sample is tested for this Set of parameters: Phosphate, Nitrate, Nitrite, Alkalinity and pH.
(5 tests per set).

Monitor nutrient uptake and release due to plant growth. Testing only takes a few minutes per sample.

Fertilizer influence on plant growth.
Salt - Brackish - Estuary Water

Each water sample is tested for this Set of parameters: Salinity (Dissolved Salt) and pH of Water.
(2 tests per set).

Water samples from ocean water, estuaries, bays and salt water intrusion etc are tested for salt (NaCl) concentrations. Testing only takes a few minutes per sample.

Salt levels and concentration in ocean water, estuaries, bays and salt water intrusion studies.
Minerals and Nutrients in Water

Each water sample is tested for this Set of parameters: Phosphate, Nitrate, Nitrite, Dissolved Metals (Combined Metals Cu+2, Co+2, Zn+2, Cd+2, Ni+2, etc.), Iron +2 +3, Total Dissolved Solids (TDS), Alkalinity and pH.
(8 tests per set).

Water samples from lakes, creeks, ponds, rivers etc are tested for minerals and nutrients required for biological growth. Testing only takes a few minutes per sample.



Natural mineral and nutrient panel for environmental water studies.
Lake, Pond and River Essential Minerals in Water

Each water sample is tested for this Set of parameters: Phosphate, Nitrate, Nitrite, Dissolved Metals (Combined Metals Cu+2, Co+2, Zn+2, Cd+2, Ni+2, etc.) and Iron +2 +3.
(5 tests per set).

Water samples from lakes, creeks, ponds, rivers etc are tested for essential minerals required for biological growth. Testing only takes a few minutes per sample.

Essential minerals role in aquatic growth and algae blooms.
Aquatic and Algae Growth Nutrients in Water

Each water sample is tested for this Set of parameters: Phosphate, Nitrate, Nitrite, Alkalinity and pH.
(5 tests per set).

Water samples from lakes, creeks, ponds, rivers etc are tested for basic nutrients required for biological growth. Testing only takes a few minutes per sample.

Nitrogen and phosphorus influence aquatic growth and algae blooms.
Environmental and Outdoor Water Full Panel and Bacteria Tests

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Total Dissolved Solids (TDS) Nitrate, Nitrite, Phosphate, Dissolved Metals (Combined Metals Cu+2, Co+2, Zn+2, Cd+2, Ni+2), Iron (2+, 3+) and Bacterial Growth Indicator.
(10 tests per set).

Detailed experiment for science fair project that combines chemical and bacteria testing. Chemical testing both mg/L (or ppm) and microgm/L (or ppb)) only takes a few minutes per sample. The bacteria sample grows for 2 days before reading.

Outdoor water panel with wide range of chemical parameter tests and bacteria testing for detailed comparison of outdoor sources and conditions.
Environmental and Outdoor Water Source

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Total Dissolved Solids (TDS).
(4 tests per set).

Experiment for a first time science fair project. Testing only takes a few minutes per sample.

Outdoor water source such as lakes, creeks, ponds, rivers etc are tested for basic chemical parameters.
Balanced Minerals in Water

Each water sample is tested for this Set of parameters: Phosphate, Nitrate, Nitrite, Dissolved Metals (Combined Metals Cu+2, Co+2, Zn+2, Cd+2, Ni+2), Iron +2 +3, Alkalinity and pH.
(7 tests per set).

Supporting tests for biological growth studies and experiments. Testing only takes a few minutes per sample.


Monitor balanced minerals in buffered water that are involved in biological growth rates and uptake.
Essential Minerals in Water

Each water sample is tested for this Set of parameters: Phosphate, Nitrate, Nitrite, Dissolved Metals (Combined Metals Cu+2, Co+2, Zn+2, Cd+2, Ni+2), Iron +2 +3.
(5 tests per set).

Supporting tests for biological growth studies and experiments. Testing only takes a few minutes per sample.

Monitor essential minerals in water that are involved in biological growth rates and uptake.
Test Drinking Water Free Chlorine by EPA Method Test Kit

Each water sample is tested for this Set of parameters: Free Chlorine, pH and Alkalinity.
(3 tests per Set).

Experiment for a first time science fair project. Testing only takes a few minutes per sample.

Testing Free Chlorine by EPA Method in drinking.
Advanced Compare Drinking Water and Bottled Water

Each water sample is tested for this Set of parameters: Alkalinity, pH, Water Hardness, Free Chlorine and Total Chlorine, Total Dissolved Solids (TDS) and Dissolved Metals (Combined Metals Cu+2, Co+2, Zn+2, Cd+2, Ni+2, etc.).
(7 tests per Set)

Detailed experiment for science fair project that combines chemical testing in both mg/L (or ppm) and microgm/L (or ppb)) while taking only a few minutes per sample for testing.

Advanced compare different brands of bottled water and drinking water from the faucet.
Beginner Compare Drinking Water and Bottled Water

Each water sample is tested for this Set of parameters: Alkalinity, pH, Water Hardness, Free Chlorine and Total Chlorine.
(5 tests per Set)

Experiment for a first time science fair project. Testing only takes a few minutes per sample.

Compare different brands of bottled water and drinking water from the faucet.
Public Drinking Water Fountain

Each water sample is tested for this Set of parameters: Alkalinity, pH, Water Hardness, Free Chlorine, Total Chlorine plus Bacteria Growth (6 tests per set).

Experiment for science fair project that combines chemical and bacteria testing. Chemical testing only takes a few minutes per sample. The bacteria sample grows for 2 days before reading.

Test drinking water fountains at schools, malls, parks - anywhere there are water fountains of interest.
Well Water Profile

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Iron+2 and+3, Nitrate and Nitrite.
(6 tests per set).

Experiment for rural science fair project. Testing only takes a few minutes per sample.


Basic tests for well water that is not treated with chlorine.
City Water Profile

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Iron+2 and+3, Free Chlorine and Total Chlorine.
(6 tests per set).

Good science fair project experiment for city neighborhoods with older buildings. Testing only takes a few minutes per sample.


City water shows signs of rust and staining from natural sources or old plumbing.
Drinking Water Full Panel Water Tests plus Bacteria Growth Indicator

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Nitrate, Nitrite, Free Chlorine, Total Chlorine, Total Dissolved Solids (TDS), Dissolved Metals (Combined Metals Cu+2, Co+2, Zn+2, Cd+2, Ni+2, etc.) and Bacterial Growth Indicator and Bacterial Growth Indicator.
(10 tests per set).

Detailed experiment for science fair project that combines chemical and bacteria testing. Chemical testing both mg/L (or ppm) and microgm/L (or ppb)) only takes a few minutes per sample. The bacteria sample grows for 2 days before reading.

Drinking water panel with wide range of chemical and bacteria testing.

Drinking Water Basic Tests plus Bacteria Growth Indicator

Each water sample is tested for this Set of parameters: pH, Alkalinity, Water Hardness, Nitrate, Nitrite, Free Chlorine and Total Chlorine plus Bacterial Growth Indicator.
(8 tests per set).

Good experiment for science fair project that combines chemical and bacteria testing. Chemical testing only takes a few minutes per sample. The bacteria sample grows for 2 days before reading.


Compare drinking water from various sources and water treatments - plus bacteria.